-
Wire and cable classification
Bare wire and bare conductor productsThe main features of this product are pure conductor metal, no insulation and sheath, such as steel core aluminum strand, copper and aluminum confluence line, electric locomotive line and so on. The processing technology is mainly pressure processing, such as melting, calendering, drawing, twisted / compacting and so on. T…[More]
Release time : 2018-07-11 -
How to distinguish the spring finger
Common spring stiffnessElastic modulus is one of the most important and characteristic mechanical properties of elastic materials. It is the characterization of the difficulty of the deformation of the object. It is expressed in E. It is defined as the ratio of the stress to the corresponding strain when an ideal material has small deformation. E is expressed…[More]
Release time : 2018-07-02 -
Classification of cable
The cable has power cable, control cable, compensating cable, shielded cable, high temperature cable, computer cable, signal cable, coaxial cable, fire-resistant cable, ship cable, mining cable, aluminum alloy cable and so on. They are made up of single strands or multiple wires and insulating layers, which are used to connect circuits, electrical appliances,…[More]
Release time : 2018-06-25 -
How to choose a suitable special cable manufacturer
After many years of development, special cable has emerged a lot of high quality enterprises, which is represented by Shanghai Yi Chu wire and cable Co., Ltd., established in 2005, 10 years of development, technology has been fully mature, quality assurance, has been able to replace imported special cable, quality can reach import special cable more than 90% …[More]
Release time : 2018-06-19 -
The structure of the spring finger
Spring finger is a new type of electric connection in high voltage switch industry. It has the advantages of simple structure, convenient installation, strong flow ability and cost saving. It can greatly reduce the labor intensity and production cost by applying the closed assembly.1, the structure is simple, the volume is small, the cost is low, the cost is …[More]
Release time : 2018-06-14 -
What quota suborder should be set for the communication cable
Communication cable equipment should be installed in the C.13.1.2 cable laying.At present, the laying quota of power cable is considered according to three core (including three core connecting ground), 5 core power cable laying quota is multiplied by coefficient 1.3, 6 core power cable multiplied by 1.6, increase the quota of one core by 30%, and so on. The …[More]
Release time : 2018-06-11 -
What is the mobile soft cable
The mobile soft cable is mainly made of rubber insulated rubber (or similar material) sheath, fifth or sixth conductor structure cables. The bending radius of the cable is 5-6 times, and the sheath is wear-resistant. So when it comes to mobile applications, it's called mobile flexible cables.A cable is a cable made by a number of fine copper wires. The cable …[More]
Release time : 2018-06-04 -
What is a spring touch
The spring touch finger is a ring spring, which can transmit strong current in small space, and can also be used for purely mechanical connection. It is suitable for use in a variety of static or dynamic medium and high pressure environments. It can be used in robot industry, automobile industry, space industry, petrochemical industry, medical industry, subma…[More]
Release time : 2018-05-28 -
Where is the difference between the soft cable and the cable?
Hard wire is generally labeled as BV, it is a single copper wire, so relative to many shares, the hardness will be larger, the mechanical strength is large, the surface area is small, so its tensile strength is strong, it is not easy to oxidize, and the service life is long. Compared with short circuit current, it is easy to form, so it is better to use hard …[More]
Release time : 2018-05-21 -
The engineering manager came to visited Nantong Kuyud-Mol New Material Co., Ltd.…
On Jan 31, 2018,the engineering manager and product engineer of Eaton Brazil came to visited Nantong Kuyud-Mol New Material Co., Ltd. They visited the company's production line and the office area, learned much about the production process in detail, Specially paid attention to the inspection of materials. Especially, focused on the production process control…[More]
Release time : 2018-03-14 -
Nantong Kuyud-Mol New Material Co., Ltd. establish
Nantong Kuyud-Mol New Material Co., Ltd. is a newly founded company joint venture and financed by KUYUD ELECTRICAL & MOL ELECTRIC, which was formerly known as Nantong MOL Electric Co., Ltd. The company is a high-tech enterprise specialized in production of high-strength, high-conductivity composite CrZrCu materials and relative electrical connect accessories.…[More]
Release time : 2018-03-14 -
The first batch metering box of Afghanistan more than 2400 sets
The first batch metering boxof Afghanistan Mazari Sharif Distribution networkproject has 7B and 7C Section, more than 2400 sets. Delivery date is July 2017 for 7B and Dec 2017 for 7C . We have successfully completed the delivery work, and expect the subsequent installation, testing and operation.[More]
Release time : 2017-12-26
